The motor torque required to overcome the inertia of a mobile robot can be much greater than the torque needed to keep it in motion. How can this torque be determined? It is not usually an arms-chair computation but a complex and dynamic task that requires motor torque calculators to obtain near accurate result.Â
To properly size a motor for a wheeled mobile robot, it is important to focus on the situations prevailing in the topography where the robot will accelerate from rest to full speed. This leads to asking pertinent questions as follows: Is the surface on the topography an inclined plane and by how much angle is the surface inclined? Is it on a smooth or flat surface? Is the topography an undulating one? What number of wheels will provide motion for the robot and how many of those wheels will be driven by DC motors? Immediately following the number of wheels is the wheel diameter. Then it is necessary to decide on the maximum linear speed to be attained by the robot in one second.
Furthermore, it is a good design practice to determine the mass of the robot before sizing or selecting a motor. After selecting the motor, it is important to estimate the overall efficiency of the mobile robot which involves the product of the wheel, motor, and gearing efficiencies. Â This helps to establish a limiting condition above which the robot may not function optimally.
This motor torque calculator can help to simplify the iteration of computation involved in the design process of a wheeled robot. Identify the various parameters listed below and input the corresponding values. The calculator does the rest tedious work.
Maximum inclined angle
Number of wheels to be driven by DC motors
Wheel or tyre diameter
Maximum linear speed in one second
Overall Mass of the robot
Overall efficiency
Browse by Term & Class | |||
1st | SS 1 | SS 2 | SS 3 |
2nd | SS 1 | SS 2 | SS 3 |
3rd | SS 1 | SS 2 | SS 3 |
It does not require sign up or login. But a correct and valid e-mail will help the quiz machine send you the questions and answers when you click SUBMIT. Cheers!